Manual Anti-Siphon Thread Valve

Manual Anti-Siphon Thread Valve. Is there any risk in removing the fitting, sending unit or other hoses while there is fuel in the tank? If the valve has a bleed screw use it now, there may also be an off/on lever but the bleed screw works better for priming.

!Download (PDF) Rain Bird Sprinkler System Manual Database
!Download (PDF) Rain Bird Sprinkler System Manual Database from prod.consolidatedlabel.com

Turn on the water supply to the valve. (consult local building code.) caution: We have found 3/4 manual anti siphon valve thread x thread plastic, one of the dependable product received from rain bird.

Close The Flow Control On The Valve.

The lawn genie 3/4 in. Hello select your address all. • the valve must not be operated continuously for more than 12.

Unique Spring Design Allows For Optimum Opening Pressure.

Turn on the water supply to the valve. L1034 3/4 adapter for brass valves. Open the bleed screw to turn on the valve.

[Books] Champion Manual Anti Siphon Valve Pdf Books This Is The Book You Are Looking For, From The Many Other Titlesof Champion Manual Anti Siphon Valve Pdf.

It is not designed nor approved to be under constant water Do i need to remove the fuel in the tank before i do any work on it? 90 degree configuration for easy piping from tank top to grade level.

Is There Any Risk In Removing The Fitting, Sending Unit Or Other Hoses While There Is Fuel In The Tank?

For irrigation purposes, it prevents water from the system from being siphoned back into the water supply line. Or british standard thread (bsp) valve size: Want to check the anti siphon valve and other lines attached to the gas tank.

Essentially, It Stops Unsafe Water From Entering A Clean Water Supply Such As The Water That Comes From Your Faucets Or Shower Heads.

Compatible in suction or pressure systems. Male thread to pipe adapter 6 min above ground and valve should also be higher than the highest spray supplied by the valve first use o flush valve by opening the valve bleed screw for one minute o if valve still does not close fully—remove bonnet, flush, and reinstall It is not designed nor approved to be under constant water

Share This Post