Jet Tub Air Induction Valve. Run the tub for one hour for initial cleaning. Flush out the water and fill up the tub once more.
Turn off the tub’s air induction valves. Turn off the valves for air induction. Turn off the air induction valves completely clockwise.
If You Are Not Sure What To Order, Send Us Photos For Part Matching, As Well As The Make And Model Of Your.
Yes, vinegar is good to use for cleaning a jetted tub. Method 1cleaning water jets with household supplies. Turn off the air induction valves by turning them fully clockwise.
Has Slip Connections To Accommodate The 1 Inch Inner Diameter Flex Hose Or Pipe.
Flush out the water and fill up the tub once more. Turn off the air induction valves completely clockwise. The only method that i have found is to replace the valve.
Turn Off The Air Induction Valves (Knobs That Add Air To The Water) If Equipped.
Ensure all wall jet nozzles are open fully. Drain the tub and clean the remaining residue. If the manufacturer of your tub specifies otherwise in the owner’s manual, leave them open.
Fixing That Air Intake Valve Ona Jetted Tub.
If it’s a tub with water. How do you turn on a jetted tub is also important to know. Fill the tub with enough hot water to cover the jets by about three inches.
Run The Jets For The Specified Interval.
Switch the jets off then drain out all the water from your tub. The inside of the tub will need to be gently scrubbed. Doing this forces the water to flow through the plumbing inside the tub, which will concentrate the flow and result in a deeper clean.