Diy Floating Vanity Plans. There are four drawers, two cabinets, and room for two sinks on the top. How to make rustic vanity:
Cherry bath vanity from build something. Clean lines make them easy to build! Rustic diy bathroom vanity plan.
After Marking The Drain Hole Location On My Floating Vanity, I Cut The Drain Hole Using A Drill And A 2″ Hole Saw Bit As Shown Below:
You can get this brass faucet, vessel sink, and brass drain straight away from amazon. First, i cut 4 pieces of 2×2 at 22” long. As compared to the previous plan, you will build a double door storage cabinet here.
2×2 Or 2×4 Lengths To Secure To Walls And Support The Vanity.
I drilled 1 ½” pocket holes in both ends of the 18” long pieces and assembled like shown in the picture below using 2. Continue to 5 of 15 below. Using 2 3 s and 3 wood screws build the frame and anchor to studs.
When Autocomplete Results Are Available Use Up And Down Arrows To Review And Enter To Select.
Diy floating vanity step 1: Rustic diy bathroom vanity plan. This plan also incorporates a vessel sink.
While Staining The Wood, Use A Rag, Wet The Wood, Stain It, And Then Wipe The Wood Clean.
Floating reclaimed wood bathroom vanity. Cut the floating vanity drain hole. Finally, sand down all of the cut edges using 120 grit sandpaper to give your floating vanity smooth edges.
Here’s How Cassandra Described The Project:
Then i cut two 2x2s and one 2×4 at 18” long. You can complete this large diy bathroom vanity with the tools list, materials list, parts/cut list, and written directions that all come with this free plan. How to make rustic vanity: