7.3 Exhaust Pressure Control Valve

7.3 Exhaust Pressure Control Valve. Eliminates p047x codes related to exhaust back pressure! Had code 1298 i think, it was for idm.

Exhaust back pressure valve Diesel Bombers
Exhaust back pressure valve Diesel Bombers from www.dieselbombers.com

Works good unless you live in a cold climate. Codes p0299 turbo under boost, p0478 exhaust pressure control valve a high, i drove it all over under load and it did not loose power. The ebp sensor's primary function is to measure exhaust back pressure so that the pcm can control the exhaust back pressure.

I Did It On My Early 99 When I Changed My Turbo A While Back.

The ebp sensor's primary function is to measure exhaust back pressure so that the pcm can control the exhaust back pressure. #2 ยท nov 1, 2009. Injection control pressure sensor (icp) 7.

Genuine Motorcraft Turbo Exhaust Back Pressure Valve Solenoid (Ebpv) 7.3L Powerstroke Diesel.

96 7.3 have codes p1396 plug moniter fault bank #2 and p0475 exhaust pressure control valve malfunction. 7.3 diesel wont start.idm and still no start. Codes p0299 turbo under boost, p0478 exhaust pressure control valve a high, i drove it all over under load and it did not loose power.

This Then Operates The Fuel Injectors.

This solenoid is located on turbocharger pedestal The exhaust pressure control valve (also known as the exhaust back pressure valve or ebpv) is located on the turbo outlet where the downpipe to the exhaust connects. Ford 7.3 exhaust back pressure sensor.

An Inlet And Exhaust Valves Are Two Separate Things.

Fuel system sensors and components, injection pump parts repair components. The system components include a flapper valve in the exhaust outlet housing which is controlled by an actuator located in the exhaust pedestal. The terminator installs into the harness where the exhaust back pressure solenoid/actuator connects.

The Inlet Valve Lets The Fuel/ Air ,Ix Into The Cylinder.

I grind the rivets down, remove the butterfly and shaft, then put a core plug in the one shaft hole. The exhaust valve opens to let. In cold temperatures, truck owners face another problem besides hard starting.

Share This Post