I got my reader back and it was p1130, swirl control valve. Driving down the highway after 30 minutes or so, suddenly lost power, power steering etc, engine was still on and if i pressed the accelerator the car would. The sensor is connected to the front end of the valve shaft of the swirl control valve.
As You May Know, When The Engine Is At Idle Or When It Is Running At A Cooler Operating Temperature.
The swirl control valve is part of the lower intake manifold. Camshaft & valve mechanism are shipped directly from authorized nissan dealers and backed by the manufacturer's warranty. Might need to source a used one from a wrecker.
I Have A 2003 Nissan Sentra Gxe 1.8 Engine And My Check Engine Light Is On.
Sentra se r spec v; A wire or connector in the circuit could be grounded/shorted/broken. And that is what it told us was the problem.
The Swirl Control Valve Is Actually A Part That Helps To Control The Vaporization Of The Fuel Inside The Intake Passages As It Is Passed Through To The Combustion Chamber During Low Idle Or Cooler Operating Temperatures.
Starter and torque the bolts to 60 inch lbs. Asked by joymyers jan 28, 2016 at 05:19 pm about the 2005 nissan sentra 1.8 s. The pcm may have failed.
Suspect Its From The Large Vacuum Leak Area.
Will this swirl control valve fit my nissan sentra 20. First, the engine sounds alright when i start it, but driving it is a different matter. I have a 2005 nissan sentra 1.8 that has a problem with the engine.
P1137 2004 Nissan Sentra Description Swirl Control Valve Position Sensor Is Installed On The Intake Manifold.
Parts fit for the following vehicle options. A code p0340 could mean one or more of the following has happened: Car has a random cylinder misfire.